This Epson Stylus Photo 1390 adjustment program Resetter can reset the Waste Inkpad Counters and other counters in the printer. it’s totally Freeware Software.
Features Of Epson Stylus Photo 1390 Printer
The Epson Stylus Photo 1390 is a powerful printer that allows you to print pictures from your PC, camera, or memory card in seconds. The printer features a variety of printing modes, including:
- Photo print mode
- 4R borderless print mode
- Bordered print mode
- Fit-to-page print mode
- Customized size and layout
- High-speed draft print mode
What is Epson Stylus Photo 1390 Resetter Adjustment Program?
The Epson Stylus Photo 1390 Adjustment Program is a software program that allows you to reset the waste ink counter on your printer.
Epson printers are designed to work in specific ways, and if you do not follow those instructions, it can cause the printer to malfunction. One of the most important things that you need to do is install new ink cartridges when necessary. In order to let you know when this needs to happen,
Epson printers have a waste ink counter. When you reach a certain amount of waste ink, the printer will display an error message warning you about it. Unfortunately, sometimes this message appears even when you still have plenty of ink left. This is where an adjustment program like Epson Stylus Photo 1390 Resetter Adjustment Program comes in handy. It resets your waste ink counter, allowing your printer to continue working as usual without any errors or warnings.
How to use Epson Stylus Photo 1390 Adjustment Program?
Today I will tell you how to use the Epson Stylus Photo 1390 Resetter Adjustment Program.
- First, you need to download and extract the archive file.
- Then connect the printer and turn it on.
- Start the program and select the printer model – click “Check”.
- In the window that appears, click “Initialization”.
- Next, press the “OK” button. Now enter a key obtained when buying, click “OK”, then press “Finish”.
- That’s all! We hope this information was useful for you! Thank you for your attention!
Follow This Link to Download Epson Stylus Photo 1390 Resetter Adjustment Program
The file is Password Protected! Password is: thanks
You Also Read- Epson Stylus Photo 1290 adjustment program Resetter
Which operating system support this Epson adjustment program?
This adjustment program Resetter works with the following operating systems:
- Windows 2000 SP4
- Windows XP SP3 or later (32-bit only)
- Windows Vista SP2 or later (32-bit only)
- Windows 7 SP1 or later (32-bit only)
- Windows 8 (32/64-bit)
- Windows 10 (32/64-bit)
How Many Storage need To install the Epson adjustment program?
You need a minimum of 10 MB of free hard disk space for installation and at least 100 MB of free hard disk space for operation. We recommend that you have at least 50 MB of free hard disk space.
Thank you for using the Epson Stylus Photo 1390 Adjustment Program Resetter. The following procedure on how to reset the waste ink counter we refer to as the Read-Only procedure, because it doesn’t require the use of any software that is not already built-in in the printer. We want to stress that this is specific for each model, so please be careful to use the right Resetter program for your specific printer.