Menu Close

Epson Stylus Photo 1290 adjustment program Resetter Free Download

This Epson Stylus Photo 1290 adjustment program Resetter can reset the Waste Inkpad Counters and other counters in the printer. it’s totally Freeware Software.

Features Of Epson Stylus Photo 1290 Printer

Epson Stylus Photo 1290 printer is a color printer. It prints on plain paper, photo paper, and Epson specialty papers. It has a maximum resolution of 2880 by 720 dpi (dots per inch). It can print at speeds up to 30 pages per minute for monochrome documents and 6 pages per minute for color documents. You need to have 512 MB of RAM or greater to use the printer. For best results, you should have at least 2 GB of RAM installed.

The printer has 5 ink cartridges: yellow, magenta, cyan, black, and matte black (this is for printing on matte paper). Each cartridge is individually replaceable. You’ll need to replace one cartridge when it runs out of ink.

What is Epson Stylus Photo 1290 Resetter Adjustment Program?

The Epson Stylus Photo 1290 Adjustment Program is a software program that allows you to reset the waste ink counter on your printer.

Epson printers are designed to work in specific ways, and if you do not follow those instructions, it can cause the printer to malfunction. One of the most important things that you need to do is install new ink cartridges when necessary. In order to let you know when this needs to happen,

Epson printers have a waste ink counter. When you reach a certain amount of waste ink, the printer will display an error message warning you about it. Unfortunately, sometimes this message appears even when you still have plenty of ink left. This is where an adjustment program like Epson Stylus Photo 1290 Resetter Adjustment Program comes in handy. It resets your waste ink counter, allowing your printer to continue working as usual without any errors or warnings.

How to use Epson Stylus Photo 1290 Adjustment Program?

Today I will tell you how to use the Epson Stylus Photo 1290 Resetter Adjustment Program.

  • First, you need to download and extract the archive file.
  • Then connect the printer and turn it on.
  • Start the program and select the printer model – click “Check”.
  • In the window that appears, click “Initialization”.
  • Next, press the “OK” button. Now enter a key obtained when buying, click “OK”, then press “Finish”.
  • That’s all! We hope this information was useful for you! Thank you for your attention!

Follow This Link to Download Epson Stylus Photo 1290 Resetter Adjustment Program

The file is Password Protected! Password is: thanks

You Also Read- Epson Stylus Photo 1420 adjustment program Resetter

Which operating system support this Epson adjustment program?

This adjustment program Resetter works with the following operating systems:

  • Windows 2000 SP4
  • Windows XP SP3 or later (32-bit only)
  • Windows Vista SP2 or later (32-bit only)
  • Windows 7 SP1 or later (32-bit only)
  • Windows 8 (32/64-bit)
  • Windows 10 (32/64-bit)

How Many Storage need To install the Epson adjustment program?

You need a minimum of 10 MB of free hard disk space for installation and at least 100 MB of free hard disk space for operation. We recommend that you have at least 50 MB of free hard disk space.

Thank you for using the Epson Stylus Photo 1290 Adjustment Program Resetter. The following procedure on how to reset the waste ink counter we refer to as the Read-Only procedure, because it doesn’t require the use of any software that is not already built-in in the printer. We want to stress that this is specific for each model, so please be careful to use the right Resetter program for your specific printer.

Related Posts

Leave a Reply

Your email address will not be published.